Metabo KGS 303 Operations Instructions download pdf (Page 29)

ENGLISH

15.1 Available saw blades

Noise emission according to DIN EN 61029-1 **

Sound power level L

Sound pressure level at operator ear L

dB (A)

118

104

118

104

Effective value of weighted acceleration (Vibration at handle)

Uncertainty K

m/s

< 2.5

1.5

< 2.5

1.5

Dust collector (not included in standard delivery)

− Suction port diameter

− Minimum air volume flow

− Minimum vacuum at suction port

− Minimum air speed at suction port

m/s

550

740

550

740

* This machine is specially designed for the high momentary loads of crosscutting. The motor reaches the stated power of

1800 watts at S6 20% 5 min. (intermittend periodic duty-type with starting). This means that this saw can be operated for 1 minute

at full-load rating (1800 watts) within a 5 minute operating period. The motor has to deliver these 1800 watts only under extreme

load conditions - during normal crosscutting it is subjected to much lower loads. With lower loads the duty cycle of the motor

increases substancially. Thus, when used as specified, because of its high reserve capacity, overheating or overloading of the

motor is not possible.

** The values stated are emission values and as such do not necessarily constitute values which are safe for the workplace.

Although there is a correlation between emission levels and environmental impact levels, whether further precautions are neces

sary cannot be derived from this. Factors influencing the actually present environmental impact level in the workplace include the

characteristics of the work area and other noise sources, i.e. the number of machines and other neighbouring work processes. Also,

permissible workplace values may vary from country to country. This information is intended to assist the user in his estimate of

hazards and risks.

Voltage V 230 (1∼ 50 Hz) 110 (1∼ 50 Hz)

Diameter Arbor bore Tooth rake No. of teeth Used for Stock-no.

250 mm 30 mm 5° neg. 24

alternate top bevel

teeth

wood,

non-lamintated

particle board

628 013 000

250 mm 30 mm 5° neg. 48

alternate top bevel

teeth

wood,

panels

628 047 000

250 mm 30 mm 5° neg. 60

alternate top bevel

teeth

wood,

panels

thick-walled plas-

tic extrusions

628 048 000

250 mm 30 mm 6 ° neg. 80

trapezoidal-flat

teeth

wood,

panels

Cable ducting,

NF profiles,

high-quality

veneered sheets,

laminates

628 088 000

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Comments to this Manuals

No comments

Metabo KGS 303 Operations Instructions Page 29

Comments to this Manuals

Related products and manuals for Power tools Metabo KGS 303