28
ENGLISH
The machine's packing can be 100%
recycled.
Worn out power tools and accessories
contain considerable amounts of valua
-
ble raw and rubber materials, which can
be recycled.
These instructions are printed on paper
produced with elemental chlorine-free
bleaching process.
This section describes problems and
malfunctions which you should be able
to resolve yourself. If the measures
detailed here do not solve your problem,
see under "Repairs".
A
Danger!
Many accidents happen particularly
in connection with problems and
faults. Therefore please note:
• Always unplug before servicing.
• Check that all safety devices are
operational again after each fault
service.
Motor does not run
No mains voltage
• Check cables, plug, outlet and
mains fuse.
No crosscut function
Transport locking pin engaged:
• Pull transport locking pin out.
Safety lock engaged:
• Actuate the safety lock.
Only little sawing performance
Saw blade blunt (possibly tempering
marks on blade body):
Saw blade not suitable for material being
cut (see chapter "Technical specifica
-
tions");
Saw blade warped:
• Replace saw blade (see chapter
"Maintenance").
Saw vibrates heavily
Saw blade warped:
• Replace saw blade (see chapter
"Maintenance").
Saw blade incorrectly mounted:
• Mount saw blade correctly (see
chapter "Maintenance").
Saw squeals when starting
Drive belt tension too low:
• Retension the drive belt (see chap-
ter "Maintenance - Drive belt ten-
sioning").
Stiffness of rotating table
Saw dust build-up under rotating table:
• Remove saw dust.
13. Environmental Protection
14. Trouble Shooting
15. Technical specifications
Voltage V 230 (1∼ 50 Hz) 110 (1∼ 50 Hz)
Current draw A 8.4 15.9
Fuse protection A 10 (time-lag) -
Motor capacity*(power input P1, S6 20% - 5 min) kW 1.8 1.6
Protection class IP 20 20
Degree of protection II II
Saw blade speed min
-1
5020 5020
Cutting speed m/s 66 66
Saw blade diameter (outer) mm 250 250
Arbor bore mm 30 30
Dimensions
Machine in packing
− Length / width / height
Machine ready to work, rotating table in 90°position, c/w suction port
− Length / width / height
mm
mm
800 / 600 / 450
575 / 900 / 595
800 / 600 / 450
575 / 900 / 595
Maximum workpiece cross section
Standard cross cuts
− width / height
Mitre cuts (rotating table 45°)
− width / height
Bevel cutss (track arm holder 45° left)
− width / height
Compound mitre cuts (rotating table 45° / sawhead 48 ° left)
− width / height
mm
mm
mm
mm
300 / 81
210 / 81
300 / 50
210 / 45
300 / 81
210 / 81
300 / 50
210 / 45
Weight
Machine in packing
Machine ready to work
kg
kg
26
20
26
20
Permissible ambient temperature for operation
Permissible temperature for transport and storage
°C
°C
0 to + 40
0 to + 40
0 to + 40
0 to + 40
Comments to this Manuals