Metabo SBE 1100 Plus Use and Care Manual download pdf (Page 6)

ENGLISH

ENG

drugs, alcohol or medication.

A moment of

inattention while operating power tools may

result in serious personal injury.

Use personal protective equipment.

Always wear eye protection.

Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

Prevent unintentional starting. Ensure the

switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your finger on the

switch or energising power tools that have the

switch on invites accidents.

Remove any adjusting key or wrench

before turning the power tool on.

A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

Do not overreach. Keep proper footing and

balance at all times.

This enables better

control of the power tool in unexpected

situations.

Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts.

Loose

clothes, jewellery or long hair can be caught in

moving parts.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used.

Use of dust collection can reduce

dust-related hazards.

4) Power tool use and care

Do not force the power tool. Use the

correct power tool for your application.

The

correct power tool will do the job better and

safer at the rate for which it was designed.

Do not use the power tool if the switch

does not turn it on and off.

Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjustments,

changing accessories, or storing power

tools.

Such preventive safety mea ures reduce

the risk of starting the power tool accidentally.

Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

Maintain power tools. Check for misalign-

ment or binding of moving parts, breakage

of parts and any other condition that may

affect the power tool's operation. If

damaged, have the power tool repaired

before use.

Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a

hazardous situation.

5) Service

Have your power tool serviced by a

qualified repair person using only identical

replacement parts.

This will ensure that the

safety of the power tool is maintained.

Wear ear protectors with impact drills.

Expo-

sure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Hold power tool by insulated gripping surfaces,

when performing an operation where the

cutting accessory may contact hidden or it’s

wiring own cord.

Cutting accessory contacting a

“live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

Pull the plug out of the plug socket before any

adjustments or servicing are performed.

Avoid inadvertent starts by always unlocking the

switch when the plug is removed from the mains

socket or in case of a power cut. This is not neces-

sary in the case of SBE 1000, SBE 1100 Plus (with

restart protection).

Ensure that the spot where you wish to work is free

power cables, gas lines or water pipes

(e.g.

using a metal detector).

Smaller workpieces must be secured such that

they are not carried along with the drill bit when

drilling (e.g. by clamping in a vice or on a work

bench with screw clamps).

Keep hands away from the rotating tool! Remove

chips and similar material only when the machine

is not in operation.

Metabo S-automatic safety clutch. When the

safety clutch responds, switch off the machine

immediately! If the tool jams or catches, the power

supply to the motor is restricted. Due to the strong

3 Special Safety Instructions

17026970_0511 SB_Bauk10 NAFTA.book Seite 6 Freitag, 13. Mai 2011 8:38 08

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Metabo SBE 1100 Plus Use and Care Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools Metabo SBE 1100 Plus