Metabo SBE 1100 Plus Use and Care Manual download pdf (Page 7)

ENGLISH

ENG

force which can arise, always hold the machine

with both hands using the handles provided, stand

securely and concentrate.

The Metabo S-automatic safety clutch must not be

used for torque control.

Caution must be exercised when driving screws

into hard materials (driving screws with metric or

imperial threads into steel)! The screw head may

break, or a high reverse torque may build up on the

handle.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory

diseases to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in conjunc-

tion with additives for wood conditioning (chro-

mate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

SYMBOLS ON THE TOOL:

.......Class II Construction

V...........volts

A...........amperes

Hz.........hertz

W..........watts

BPM.....beat per minute

..........alternating current

.........rated speed

rpm ......revolutions per minute

.../min...revolutions per minute

See page 3.

1 Thumbwheel for gear selection

2 Additional handle / Additional handle with

vibration damping *

3Depth stop

4 Geared chuck*

5 Futuro Plus keyless chuck *

6 Futuro Top keyless chuck*

7 Slide switch (drilling/impact drilling)

8 Speed preselection setting wheel*

9 Setting wheel for setting torque control and

impulse function *

10 Electronic signal indicator*

11 Rotation selector switch *

12 Locking button for continuous activation

13 Trigger switch

* depending on equipment

Metabo S-automatic safety clutch:

If the tool jams or catches, the power supply to the

motor is restricted. Due to the strong force which

can arise, always hold the machine with both

hands using the handles provided, stand securely

and concentrate.

Auto-stop carbon brushes:

If the carbon brushes are completely worn, the

machine switches off automatically. SBE 1100

Plus: An LED lights up before the carbon brushes

wear out completely.

Restart protection:

(SBE 1100 Plus, SBE 1000)

Restart protection prevents the unintentional start-

up of the machine when it is reconnected to the

mains or when power returns following a power

failure.

Overload protection display:

(SBE 1100 Plus)

The overload protection display indicates if the

machine is overloaded.

Metabo impulse function:

(SBE 900 Impuls)

For effortless driving and removal of stubborn

screws, even with damaged heads. For spotlessly

clean drilling without a centre punch - in tiles,

aluminium or other materials.

Electronic torque control:

(SBE 900 Impuls)

When driving small screws and when thread

tapping with taps of small diameter, the torque

may be reduced to a value appropriate to the work

being carried out.

Before plugging in, check that the rated

mains voltage and mains frequency, as

stated on the rating label, match with your power

supply.

To ensure that the drill chuck is securely

fitted: After initial drilling (clockwise), use a

screwdriver to firmly tighten the safety screw

inside the drill chuck (if applicable / model-

specific). Caution left-handed thread !

(see Section 7.12)

4Overview

5 Special Product Features

6 Initial Operation

17026970_0511 SB_Bauk10 NAFTA.book Seite 7 Freitag, 13. Mai 2011 8:38 08

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Metabo SBE 1100 Plus Use and Care Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Metabo SBE 1100 Plus