Metabo SBE 1100 Plus Use and Care Manual download pdf (Page 9)

ENGLISH

ENG

your hands. Therefore, always hold the

machine with both hands using the handles

provided, stand in a safe position and concen-

trate.

7.9 Tool change with Futuro Top keyless

chuck (6)

See illustrations A on page 3.

Opening the chuck:

Grip the retaining ring and,

using the other hand, rotate the sleeve in the direc-

tion of the arrow -1-.

Clamping the tool:

Insert tool -2- as far as it will

go. Grip the retaining ring and, using the other

hand, firmly rotate the sleeve as far as it will go in

the direction of the arrow -3-.

7.10 Tool change with

Plus (5)

chuck

See illustrations B on page 3.

Opening the drill chuck:

Grip the retaining ring and, using the other hand,

rotate the sleeve in the direction of the arrow -1-.

The grating sound (depending on function) which

may be heard after opening the drill chuck is

stopped by turning the sleeve in the opposite

direction.

If the chuck is very tightly secured,

disconnect

from mains. Hold the chuck using an open-end

spanner at the flats on its head, and turn the sleeve

vigourously in the direction of the arrow -1-.

Clamping the tool

- Insert the tool -2- as far as it will go.

- Grip the retaining ring and, using the other hand,

rotate the sleeve in the direction of the arrow -3-

until the mechanical resistance which can be felt

is overcome.

Caution! The tool is not yet fully clamped!

Keep turning the sleeve (

it must "click" when

turning

) until it cannot be turned any further -

only now

is the tool

securely

clamped.

In the case of a soft tool shank, retightening may

be required after a short period of drilling.

7.11 Tool change with a geared chuck (4)

See illustrations C on page 3.

Opening the chuck:

Opening a geared chuck with

the chuck key -1-.

Clamping the tool:

Insert tool -2- as far as it will

go and tighten equally in all 3 bores using the

chuck key -3-.

7.12 Unscrewing the chuck

Futuro Top keyless chuck

(6)

(see illustration X on second to last page)

Unscrew the drill chuck with two open-end span-

ners.

Futuro Plus keyless chuck (5)

(see illustrations Y on second to last page)

Undo the locking screw. Caution! Left-handed

thread!

Grip the drill spindle using an open-end spanner.

Insert an Allen key into the chuck, tap on it with a

rubber hammer to loosen the chuck, and then

unscrew.

Geared chuck

(4)

(see illustrations Z on second to last page)

Undo the locking screw. Caution! Left-handed

thread!

Grip the drill spindle using an open-end spanner.

Insert the chuck key into the chuck, tap on it with

a rubber hammer to loosen the chuck, and then

unscrew.

In the case of deep bores pull the drill bit out of the

bore from time to time in order to remove the stone

dust or shavings.

Drill tiles and other brittle materials without impact.

Switch on the impulse function (SBE 900 Impuls

only) for drilling without a centre punch.

The drill chuck can be removed for screwdriving.

Insert screwdriver bit directly into the spindle's

hexagon socket. If a bit clamping bush (order no.

6.31281) is fitted, the screwdriver bit is held in

position.

For thread tapping (except SB 710), apply some oil

to the tap. Select a low speed and the first gear.

Start cutting in clockwise direction, stop and turn

out in counter-clockwise direction.

Cleaning the keyless chuck:

After prolonged use hold the chuck vertically, with

the opening facing down, and fully open and close

it several times. The dust collected falls from the

opening. Regular use of cleaning spray on the jaws

and jaw openings is recommended.

If it is not possible to press in the trigger (13), check

if the rotation selector switch (11) is fully at position

R or L (except SB 710).

8 Tips and Tricks

9 Cleaning, Maintenance

10 Troubleshooting

17026970_0511 SB_Bauk10 NAFTA.book Seite 9 Freitag, 13. Mai 2011 8:38 08

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments

Metabo SBE 1100 Plus Use and Care Manual Page 9

Comments to this Manuals

Related products and manuals for Power tools Metabo SBE 1100 Plus