Metabo SBE 1010 PLUS Instruction Manual download pdf (Page 10)

Instruction Manual

Mobile thermal drilling

5.10. Switching the motor on/off

To switch on the motor please press the pushbutton (1) and lock this by pressing in the button on the

side (2).

To switch off the motor press the pushbutton again as far as the stop – this automatically unlocks it –

and release it again. Wait until the motor has come to a complete standstill.

5.11. The thermal drilling process

Picture sequence from left to right

Move drill close to the

surface and press

down lightly, then

constantly increase

pressure.

As the resistance

eases, continually

increase the feed

rate.

Do not interrupt the

process, but proceed

with continually

accelerated movement

and gradually form the

bush.

When forming the

collar (bead) reduce

the feed slightly. Do

not form an

excessively flat collar.

After thermal drilling

raise the drill again

without delay!

Depending on the material type, thermal drilling requires a different force to be exerted (high-grade

steel = hard, aluminium = soft). Drill with a continually increasing pressure.

You will recognise too high a pressure

a) From a clearly audible reduction in the drill speed. For safety purposes the integrated

electronics of the motor automatically turn the hand drill unit off.

b) From deformation of the component surface.

In both cases, please reduce the contact pressure immediately. Greater pressure does not speed up

drilling, the drill wears out more quickly and the unit is overloaded.

5.12. Machining time and drilling intervals

As a guideline for thermal drilling, a machining time of approx. 5 seconds should be adhered to.

A maximum of 4 thermal drill holes per minute should be made!

We recommend that the operation of the drill is then turned off for 2 minutes.

(1)

(2)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Metabo SBE 1010 PLUS Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Power drills Metabo SBE 1010 PLUS