Instruction Manual
Mobile thermal drilling
© Copyright by Flowdrill GmbH Olbrichtstr.18 69469 Weinheim
2. General safety and hazard precautions
Before using the hand drill read the enclosed safety precautions (red volume) as well as the
instruction manual carefully and completely. Keep all the enclosed documents and only pass on the
Flow2go unit together with these documents.
Warning of hazardous electric
voltage
Wear suitable work clothing
3. Additional safety precautions
Please read the instructions for use before starting to work with the machine.
The hand drill unit supplied is only suitable for thermal drilling in conjunction with the drill base and
the customised tool holder.
To avoid eye injury, please wear protective goggles.
Before any adjustment, maintenance or repair the mains plug must be unplugged.
The tool and drill chuck are very hot after use. Please wear gloves to change the tool or allow it to
cool down completely.
Functions and operation of the electronic control module of the drill:
1. Protection of operators from accidents.
2. Ensure a long life for the drill and the tools.
3. Rotational speed setting and automatic regulation according to the relevant technological
requirements.
Please refer to the enclosed pink Metabo “Safety Precautions” brochure for further information.
Comments to this Manuals