Metabo DS 200 Use and Care Manual download pdf (Page 12)

100

ENGLISH

ENG

Grinding discs must be stored and handled with

care in accordance with the manufacturer's

instructions.

Do not touch the rotating grinding wheel!

Only work when the safety cover (1) and sanding

belt cover (16) are fitted.

Swivel the eye preservers (9) downwards before

grinding.

Use the perimeter (not the sides) of the grinding

wheels for grinding.

Do not reduce the speed of the grinding wheel by

pressing on the sides.

The workpiece to be processed must be large

enough, or small enough, to be held safely with

both hands.

Only work when the grinding wheels are fitted to

minimise the risk of coming into contact with the

rotating spindle.

High temperatures can result after long-term oper-

ation.

Always wear eye goggles, hearing protec-

tion and protective gloves. Use other avail-

able personal protective equipment, e.g.

suitable protective work clothing. Ensure that

sparks produced during work do not constitute a

risk to the user or other personnel and are not able

to ignite inflammable substances. Endangered

areas must be protected with flame-resistant

covers. Make sure that fire-risk areas are always

provided with suitable fire extinguishers.

Dust from material such as paint containing lead,

some wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory

diseases to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in conjunc-

tion with additives for wood conditioning (chro-

mate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

The workpiece can become hot during grinding.

Do not allow water within the vicinity of electric

machine parts or close to people in the working

area.

If a grinding material blockage occurs, switch off

the grinder immediately, allow the motor to stop

and unplug the grinder. Identify the cause and

remove the blockage.

Clean, check and perform maintenance work on

the machine and guard devices regularly. Regu-

larly clean the inside of the grinding wheels and

belt grinder housing. The grinding wheels and

sanding belt must be able to rotate freely within the

housing.

Unplug when the grinder is not in use, before

making any adjustments or carrying out modifica-

tions, repairs or maintenance.

Regularly check the power cable on the grinder

and have it repaired by an approved expert if

damaged.

Regularly check extension cables and replace if

damaged.

Check the grinder for possible damage: Before

using the grinder, protective devices or slightly

damaged components must be carefully checked

to ensure they are operating perfectly and as

intended. Check that moving parts are in perfect

working order and do not jam and check whether

parts are damaged. All parts must be correctly

installed and fulfil all conditions necessary to

ensure perfect operation of the grinder. Damaged

protective devices and parts must be repaired or

replaced according to specifications by an author-

ised specialist workshop.

See page 3 and page 4 .

1 Safety cover

2 Adjusting nut

3 Clamping flange

Grinding wheel

5 Back flange

6 Dust extraction connection

7 Safety cover

8 Workpiece support

9 Eye preservers

10 Spark deflector

11 Switch (on/off)

12 Lever (sanding belt replacement) *

13 Screws for securing the sanding belt cover *

14 Rotary knob for adjusting the belt run *

15 Arrow (direction of circulation of sanding belt)*

16 Sanding belt cover *

17 Screws for securing the water container *

18 Water container *

5Overview

17026975_0611 DS DSD TNS BS.book Seite 12 Dienstag, 21. Juni 2011 1:48 13

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

Comments to this Manuals

No comments

Metabo DS 200 Use and Care Manual Page 12

Comments to this Manuals