Metabo KNSE12-150 Use and Care Manual download pdf (Page 5)

ENGLISH

ENG

1 Specified Use

2 General Safety Instructions

3 Special Safety Instructions

4Overview

5Scope of Delivery

6 Commissioning

7 Attaching the Accessory

8Use

9Cleaning

10 Troubleshooting

11 Accessories

12 Repairs

13 Environmental Protection

14 Technical Specifications

The machines, with original Metabo accessories,

are suitable for polishing metal without the use of

water.

Not suitable for use with roughing disk or cut-off

wheel.

Not suitable for grinding, sanding, wire brushing or

abrasive cutting-off operations.

The user bears sole responsibility for any damage

caused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

observed.

WARNING – Reading the operating

instructions will reduce the risk of injury.

For your own protection and for the

protection of your power tool pay atten-

tion to all parts of the text that are

marked with this symbol!

General Power Tool Safety Warnings

WARNING

Read all safety warnings and

all instructions.

Failure to follow the warn-

ings and instructions may result in electric shock,

fire and/or serious injury.

Save all warnings and

instructions for future reference!

The term

"power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

Keep work area clean and well lit.

Cluttered

or dark areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power

tools create sparks which may ignite the dust

or fumes.

Keep children and bystanders away while

operating a power tool.

Distractions can

cause you to lose control.

2) Electrical safety

Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools.

Unmodified plugs

and matching outlets will reduce risk of elec-

tric shock.

Avoid body contact with earthed or

grounded surfaces, such as pipes, radia-

tors, ranges and refrigerators.

There is an

increased risk of electric shock if your body is

earthed or grounded.

Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or

entangled cords increase the risk of electric

shock.

When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

If operating a power tool in a damp location

is unavoidable, use a residual current

device (RCD) protected supply.

Use of an

RCD reduces the risk of electric shock.

Operating Instructions

Dear Customer, Thank you for the trust you have placed in us by buying a Metabo power tool. Each

Metabo power tool is carefully tested and subject to strict quality controls by Metabo's quality assurance.

Nevertheless, the service life of a power tool depends to a great extent on you. Please observe the infor-

mation contained in these instructions and the enclosed documentation. The more carefully you treat your

Metabo power tool, the longer it will provide dependable service.

Contents

1 Specified Use

2 General Safety Instructions

17026994_0610 KNSE 12-150 NAFTA.book Seite 5 Dienstag, 25. Mai 2010 11:43 11

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments

Metabo KNSE12-150 Use and Care Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Metabo KNSE12-150