Metabo BW 750 Operations Instructions download pdf (Page 12)

ENGLISH

must be correctly installed and meet all

conditions necessary for the proper

operation of the machine.

Damaged protection devices or parts

must be repaired or replaced by a quali-

fied specialist. Have damaged switches

replaced by a service centre. Do not use

this machine if the switch can not be

turned ON or OFF.

Keep handles free of oil, grease and

resin.

3.3 Safety devices

Motor protection

The electronic motor protection stops

the motor by overcurrent detection,

should the motor be locked (e.g. by a

jamming saw blade)

No-voltage release

The no-voltage release feature prevents

the machine from starting up when the

power is restored after a power failure.

Motor brake

The motor brake brakes the saw blades

after the machine has been turned OFF.

With an intact motor brake the post-run-

ning of the saw blade shall not exceed

10 seconds.

Feed rocker

The feed rocker allows for a safe feeding

of the logs to be cut. When the feed

rocker is released it must automatically

return to its starting position.

Blade guard

During operation the blade guard must

always be installed. It must not show any

signs of damage. The blade guard's

extension arm must automatically return

to its starting position.

3.4 Symbols on the machine

ADanger!

Disregard of the following warnings

could lead to serious personal injury

or material damage.

Wear hearing pro-

tection.

Use this machine

out of doors only.

Max  of saw

blade: 700 mm

Saw blade thick-

ness: 3.2 mm

 Sawblade arbor

bore: 30 mm

Maximum saw

blade speed

Number and con-

figuration of teeth:

56 combination

multiple teeth

Information on the nameplate:

3.5 Symbols used through-

out these instructions

ADanger!

Indicates a risk of personal injury or seri-

ous material damage.

BRisk of electric shock!

Risk of personal injury by electric

shock.

cEntanglement/trapping hazard!

Risk of personal injury by body parts

or clothing being drawn into the rotat-

ing saw blade.

Caution!

Risk of material damage.

Note:

Additional information.

x Robust, powder-coated welded

steel construction for maximum tor-

sional resistance at low weight.

x Hinged wheel set for unproblematic

relocating.

x Powerful, splash-proof three-phase

motor.

5.1 Machine installation

ADanger!

This machine shall only be operated

at a location meeting the following

conditions:

 outdoors

 level, non-slip ground

 all four of the machine's legs

must be able to stand firmly on

the ground

1. Transport the machine on the pallet

to a suitable location.

2. Remove packing and enclosed

parts.

3. Remove the screws holding the

machine on the pallet.

4. Lift machine off the pallet.

5.2 Machine transport

1. Pull handle bars (16) out.

2. Lift machine at the handle bars.

3. Lower wheel set by turning the lever

(17) over.

4. Lower machine onto the wheels and

move to desired location.

AHazard generated by insecure

stand of the machine!

Before commencing with any cutting,

retract the wheel set and make sure

the machine stands firmly.

5.3 Mains connection

BDanger! High voltage

Operate the saw only on a power source

matching the following requirements

(see also "Technical Specifications"):

 Outlets with neutral wire, being

properly installed, earthed and

tested.

 Mains voltage and frequency

must conform with the data

EL 700 x 3.2 x 30

(9) Manufacturer

(10) Serial number

(11) Machine designation

(12) Motor specifications (see also

"Technical Specifications")

(13) Date of manufacture

(14) CE mark – this machine meets

the EC directives as per declara-

tion of conformity

(15) Dimensions of permissible saw

blades

4. Special Product Features

n max. 2000 rpm

Z=56 KV

13 14 15

5. Transportation and

Installation

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Comments to this Manuals

No comments

Metabo BW 750 Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Circular saws Metabo BW 750