Metabo Power 260 Operations Instructions download pdf (Page 16)

ENGLISH

Danger! Risk of electric shock!

• Do not expose the machine to rain.

Do not operate the machine in a

damp or wet environment.

Prevent body contact with earthed

objects such as radiators, pipes,

cooking stoves, refrigerators when

operating this machine.

• Do not use the power cable for any

purpose it is not intended for.

Risk of injury by moving parts!

• Do not operate the machine without

installed guards.

• Always keep sufficient distance to

the band saw blade. Use suitable

feeding aids, if necessary. Keep suf-

ficient distance to driven compo-

nents when operating this machine.

• Wait for the band saw blade to come

to a complete stop before removing

cutoffs, scrap, etc., from the work

area.

• Cut only stock of dimensions that

can safely be held during cutting.

• Do not attempt to stop the band saw

blade by pushing the work piece

against its side.

• Ensure the machine is disconnected

from power supply before servicing.

• Ensure that when switching on (e.g.

after servicing) no tools or loose

parts are left on or in the machine.

• Unplug if the machine is not used.

Cutting hazard, even with the

cutting tool at standstill!

• Wear gloves when changing cutting

tools.

• Store band saw blades in such man-

ner that nobody can get hurt.

Risk of kickback (work piece is

caught by the band saw blade and

thrown against the operator)!

• Do not jam work pieces.

• Cut thin or thin-walled work pieces

only with fine-toothed band saw

blades. Always use sharp band saw

blades.

• If in doubt, check work piece for

inclusion of foreign matter (e.g. nails

or screws).

• Cut only stock of dimensions that

can safely be held during cutting.

• Never cut several work pieces at the

same time – and also no bundles

containing several individual pieces.

Risk of personal injury if individual

pieces are caught by the band saw

blade uncontrolled.

• When cutting round stock, use a

suitable jig to prevent the work piece

from turning.

Entangelement hazard!

• Ensure that no parts of the body or

clothing can be caught and drawn in

by rotating components (no neck

ties, no gloves, no loose-fitting

clothes; contain long hair with hair

net).

• Never saw work pieces containing

the following materials:

− ropes

− strings

− cords

− cables

− wires.

Hazard generated by insuffi-

cient personal protection gear!

• Wear hearing protection.

• Wear safety glasses.

• Wear dust mask.

• Wear suitable work clothes.

• When working outdoors wearing of

non-slip shoes is recommended.

Risk of injury by inhaled wood

dust!

• Some types of wood dust (e.g.

beech, oak, ash) may cause cancer

when inhaled. Work only with a suit

able dust collector attached to the

saw. The dust collector must comply

with the data stated in the technical

specifications.

• See to it that only as little as possi-

ble wood dust will get into the envi-

ronment:

− Remove wood dust deposit in the

work area (do not blow away!);

− fix any leakages on the dust col-

lector;

− ensure good ventilation.

Hazard generated by modifica-

tion of the machine or use of parts

not tested and approved by the manu-

facturer!

• Assemble the machine in strict

accordance with these instructions.

• Use only parts approved by the

manufacturer. This applies espe

cially to:

− band saw blades (see "Technical

Specifications" for stock nos.);

− safety devices (see "Technical

Specifications" for stock nos.).

• Do not change any parts.

Hazard generated by machine

defects!

• Keep the machine and accessories

in good repair. Observe the mainte-

nance instructions.

• Before every use check tthe

machine for possible damage:

before operating the machine all

safety devices, protective guards or

slightly damaged parts need to be

checked for proper function as spec

ified. Check to see that all moving

parts work properly and do not jam.

All parts must be correctly installed

and meet all conditions necessary

for the proper operation of the

machine.

• Damaged protection devices or

parts must be repaired or replaced

by a qualified specialist. Have dam

aged switches replaced by a service

centre. Do not operate the machine

if the switch can not be turned ON or

OFF.

• Keep handles free of oil and grease.

Danger from blocking work-

pieces or workpiece parts!

If blockage occurs:

1. Switch machine OFF.

2. Unplug mains cable.

3. Wear gloves.

4. Clear the blockage using a suitable

tool.

3.3 Symbols on the Machine

Danger!

Disregard of the following

warnings may lead to serious per

sonal injury or material damage.

Read instructions.

Unplug before servicing.

Band saw blade running

direction.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comments to this Manuals

No comments

Metabo Power 260 Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for Air compressors Metabo Power 260