Metabo Mega 450 W Operations Instructions download pdf (Page 15)

ENGLISH

Compressor does not run:

• No mains voltage.

− Check cables, plug, outlet and

mains fuse.

• Mains voltage too low.

− Use only extension cables with

sufficient lead cross section (see

"Technical specifications"). Avoid

using extension cable when

device is cold.

• Compressor was stopped by

unplugging.

− Switch compressor OFF at the

On/Off switch, then ON again.

• Motor protection tripped, e.g. by

insufficient cooling (cooling fins cov

ered).

− Switch compressor OFF at the

On/Off switch; remove cause for

overheating; let cool off for

approx. 10 minutes; reset the

motor protection switch; switch

compressor ON again at the On/

Off switch.

Compressor runs but does not build

up sufficient pressure.

• Condensate drain of pressure ves-

sel leaky.

− Check gasket of drain cock(s);

replace if necessary.

− Tighten drain cock(s) fingertight.

• Drain cock on cup of filter/regulator

unit open.

− Tighten drain screw fingertight.

• Check valve leaky.

− Have check valve serviced by

qualified service centre.

Air tool is not supplied with sufficient

pressure.

• Pressure regulator not opened wide

enough.

− Open pressure regulator more.

• Hose connection between compres-

sor and air tool leaky.

− Check air hoses, replace defec-

tive parts if necessary.

Danger!

Repairs to power tools must be

carried out by qualified electricians

only!

Electric tools in need of repair can be

send to the service centre in your coun-

try. See spare parts list for address.

Please attach a description of the fault to

the power tool.

The machine's packaging can be 100 %

recycled.

Worn out devices and accessories con-

tain considerable amounts of valuable

raw and plastic materials, which can be

recycled.

These instructions are printed on chlo-

rine-free bleached paper.

8. Repairs

9. Environmental protection

10. Technical specifications

Suction capacity l/min 330

Free air delivery (volume flow rate) l/min 190

Filling rate l/min 220

Working pressure (compression end pressure) bar 10

Pressure vessel volume l 50

No. of air outlets 2

Compressor pump model B 2800 B

No. of cylinders 2

Speed (compressor pump) min

-1

1499

Motor capacity kW 2.2

Supply voltage (50 Hz) V 230

Rated current A 10

Fuse protection min. A 16 (time-lag)

Degree of protection IP 44

Maximum overall length when using extension cables with:

– 3 x 1.5 mm

lead cross-section

– 3 x 2.5 mm

lead cross-section

Oil grade 10 W 40

Oil qantity for oil change l 0.21

Dimensions: length x width x height cm 88 x 49 x 77

Weight kg 54

Sound pressure level L

at 4 m maximum dB (A) 73 ± 3

Sound power level L

dB (A) 93 ± 3

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 62 63

Comments to this Manuals

No comments

Metabo Mega 450 W Operations Instructions Page 15

Comments to this Manuals

Related products and manuals for Air compressors Metabo Mega 450 W