Metabo HC 410 User Manual download pdf (Page 21)

12.5 Setting of Fence

12.6 Cutter Guard Setting

The cutter guard throat height is set

by turning the starknob screw (A)

clockwise or counter-clockwise.

For jointing the opening between the

fence and the guard extrusion can be

set after loosening the lock lever (B).

Before the planing beds can be

opened, the cutter guard assembly

must be swung out of the way by

180°. Loosen lever (C), swing

assembly over and retighten lever.

The 90° position of the fence extru-

sion against the planing beds can be

set by adjusting setting screw (C).

Notice: Always set fence so it rests

flush on the planing tables (see arrow).

12.7 Setting Depth of Cut/Scale Reading

Prior to any adjustment loosen

ratchet lever (A) approx. 1/2 turn.

Turning the knurled setting handle (B)

raises or lowers the infeed table.

The set depth of cut is indicated by the

venier scale. After required depth of

cut is set retighten the ratched lever

(A).

1 matching 1 = 1 mm depth of cut

2 matching 2 = 2 mm depth of cut

etc.

➞

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Metabo HC 410 User Manual Page 21