Metabo BKS 400 Operations Instructions download pdf (Page 4)

Place both support struts onto the table, set

square with the slot of the table insert and bolt

to the table. Use 10 each

countersunk screw M6x16,

hex. nut M6

Install the guard support bracket without fully

tightening the screws.

Use 2 each

countersunk screw M6x16, hex. nut M6,

hex. head screw M8x16,

hex. nut M8

Attach gusset plate with carriage bolt M10x25,

washer 10.5 and starknob M10

Turn saw over and stand onto its legs.

Align and fully tighten all screws.

Install legs with struts and diagonal struts to table.

- Tighten all screws handtight only at this stage. - Install struts as shown in drawing “A”.

Hardware: 22 each hex. head bolt M8x16; 4 each hex. head bolt M8x20; 26 each hex. nut M8

Install both hex. head bolts M8x90 into chipca-

se, secure with hex. nuts M8

Re-install saw blade, be sure of correct direc-

tion of rotation. Install chip case lid. Use 2 each

torque type hex. nut M8

Bolt lifting eyes to table (at rear left and front

right). Place pressure spring onto bolt before

screwing on nut. Use 2 each

hex. bolt M8x35

pressure spring 9x20

torque type hex. nut M8

Bolt switch to front support strut. Use 2 each

hex. head bolt M6x16

torque type hex. nut M6

Attach strain relief clamp to support strut. Use

hex. head bolt M6x16

hex. nut M6

Remove saw blade and bolt chip case to both

support struts and motor plate. Hardware:

4 ea. hex head screw M8x16

4 ea. hex. nut M8

2 ea. hex. head bolt M6x16

2 ea. washer 6.4

2 ea. hex. nut M6

90°

"A"

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Metabo BKS 400 Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Circular saws Metabo BKS 400