Metabo PE 12-175 Operations Instructions download pdf (Page 8)

ENGLISHen

Certain kinds of dust are classified as carcinogenic

such as oak and beech dust especially in

conjunction with additives for wood conditioning

(chromate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is

recommended.

Follow national requirements for the materials you

want to work with.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

When working in dusty conditions, ensure that

ventilation openings are not blocked. If it becomes

necessary to remove dust, first disconnect the

power tool from the mains supply (use non-metallic

objects) and avoid damaging internal components.

Damaged, eccentric or vibrating tools must not be

used.

Connect a FI circuit-breaker with max.

release current (30 mA) upstream when using the

machine outdoors!

Pull the plug out of the socket before making any

adjustments, converting or servicing the machine.

A damaged or cracked additional handle must be

replaced. Never operate a machine with a defective

additional handle.

A damaged or cracked hand guard must be

replaced. Never operate a machine with a defective

hand guard.

SYMBOLS ON THE TOOL:

.............Class II Construction

V.................volts

A.................amperes

Hz...............hertz

W................watts

.../min .........revolutions per minute

~.................alternating current

n .................no load speed

See page 2.

1 Spindle locking button

2 Sliding

on/off switch

3 Speed adjustment wheel

4 Electronic signal indicator

5 Hand protection

6 Additional handle

Marathon Motor

The dust-proof Metabo Marathon motor guarantees

an up to 50% longer service life thanks to the

Metabo winding protective grille and powder-

coated field winding.

Autostop carbon brushes

When the Autostop carbon brushes are worn, the

power tool switches off automatically, thus

preventing armature damage.

VTC electronics

The VTC electronics make material-compatible

work possible and an almost constant speed, even

under load. The Vario-Tacho Constamatic

Electronics (VTC) also includes starting current

limitation, electronic smooth start, monitoring of the

winding temperature and electronic restart

protection.

Restart protection

The restart protection prevents the tool from starting

unintentionally when being plugged in again or

when power is restored after a power failure.

Ergonomic front cap

Ergonomic front cap for excellent machine

guidance during continuous operation.

Spindle lock

Spindle lock for simple tool change.

Before plugging in, check to see that the rated

mains voltage and mains frequency, as

specified on the rating label, match your power

supply.

Press in the spindle locking knob (1) only

when the spindle is stationary!

Locking the spindle

Press in the spindle locking button (1) and turn the

spindle by hand until the spindle locking button

engages.

Attaching the hand guard

(for work with the support

plate and sanding sheet, or sheepskin polishing disc

with cord drive)

Slide the hand guard (5) over the threaded fitting on

the additional handle (6). Align hand protection and

install with additional handle.

4. Overview

5. Special Product Features

6. Commissioning

7. Installing the tools

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Metabo PE 12-175 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Straight grinders Metabo PE 12-175