Metabo BHE-D 24 Operations Instructions download pdf (Page 8)

ENGLISH

ENG

Drilling

Hammer drilling

Chiselling

(KHE 2443 only)

In chiselling mode, the chisel is locked so that it

cannot turn.

To position the chisel for a particular application,

set the switch button (8) between and .

When a chisel is fitted, only operate the

machine in the chiselling operating mode

Avoid levering with the machine when a

chisel is fitted.

7.4 Setting the direction of rotation, engag-

ing the transporting safety device

(switch-on lock)

Do not activate the rotation selector switch

(4) unless the motor has completely stopped.

See page 3 (please unfold).

R = Clockwise setting

L = Counter-clockwise setting

7.5 Tool Change with SDS Chuck

Before fitting, clean tool shank and

apply special grease (accessories

order no. 6.31800)! Use only SDS-plus tools.

Inserting the tool:

Turn the tool while inserting, until it engages.

The tool is automatically locked.

Removing the tool:

Turn tool lock (2) in direction indicated by arrow

(a) and remove the tool (b).

Only moderate pressure is required for hammer

drilling and chiselling. Exerting a high force does

not increase performance.

When drilling deep holes, remove the drill bit

periodically from the hole to release the stone

dust.

Drill tiles and other brittle materials without impact.

The vent slots of the machine should be cleaned

from time to time.

If the trigger (6) can not be depressed, check to

see that the direction of rotation selector switch (4)

is fully set to the R or L position.

Use only genuine Metabo accessories.

If you need accessories, check with your dealer.

For the dealer to select the correct accessory, he

needs to know the exact model designation of

your power tool.

See page 4.

A Tools with SDS-plus shank

B Connecting piece

CGeared chuck

D Twist drills for metal and wood

E Screwdriver bit

F Carbide core cutter

G Dust extraction kit

H Special grease (for lubricating the tool shanks)

For complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out by

qualified electricians ONLY!

Contact your local Metabo representative if you

have Metabo power tools requiring repairs. For

addresses see www.metabo.com.

You can download a list of spare parts from

www.metabo.com.

8Tips and Tricks

9 Maintenance

10 Trouble Shooting

11 Accessories

12 Repairs

17027073_0111 BHE 2243 KHE 2443 NAFTA.book Seite 8 Dienstag, 18. Januar 2011 11:03 11

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Metabo BHE-D 24 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Power drills Metabo BHE-D 24