Metabo BKH 400 Operations Instructions download pdf (Page 23)

- IMPORTANT - WIRING INSTRUCTIONS

Warning: This appliance must be earthed!

For machines with a single phase motor (240 volt or 110

volt) the mains lead is to be connected in accordance

with the following colour code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

If your machine is supplied with a continental 2-pin +

earth safety appliance inlet, the connector is to be wired

up as follows:

Earth - Centre pin

Live One each to

Neutral other 2 pins

}

3-Phase Motors (415 Volts)

Machines fitted with 3-phase motors are connected to the mains using a 5-pin industrial appliance-inlet/connector to

BS 4343 (IEC 309).

Ensure it is wired and connected only by a qualified electrician.

IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN!

SPINDLE MOULDER OPERATOR SAFETY

GENERAL SAFETY

Do not use this machine until you have read:

A: "The woodworking machines regulations 1974

(Factories act 1961 SI 1974 No. 903)

Published by H.M.S.O.

B: The operating instructions is spupplied with this

machine. This document is prepared for worlwide

distribution but certain operations described are

prohibited in the U.K. under 1974 woodworking

machines regulations without further guarding being

added, I.E. grooving, rabbeting, tenoning or

moulding.

SPECIFIC SAFETY

1. Ensure you follow the safety rules shouwn in the

operation manual.

2. Ensure you know how to switch off the machine in

an emergency.

3. Always wear eye protection.

4. Do not use a crrcular sawblade smaller then 6/10 of

the maximum diameterblade which can be properly

fitted (see table below).

5. Ensure the riving knive is correctly atjusted. When

replacing the blade, enjure the blade plate is thinner

than the riving knive.

6. Always use a push stick in accordance with the

woodworking machine regulations 1974.

7. Ensure guards are always in position and correctly

atjusted (see 1974 regulations for guidance).

Machine No. Standard Blade dia. mm Smallest Blade dia. mm

PK 250 250 150

HS 315 315 189

BS 400 400 240

BKH 400 400 240

KGS 300 250 250

KGT 500 250 250

UK 330 250 250

RECORD POWER-metabo WOODWORKING MACHINERY

Record Power LTD, Parkway Works, Sheffield

(07 42) 75 63 85/43 43 70

IMPORTANT

If your electricity supply conditions present

start-up difficulties we recommend the use

of a BS 3434 type plug and socket.

This work should be done only by a

qualified electrician.

IMPORTANT!

We strongly recommend the

use of a Dust Collector

on this machine.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments

Metabo BKH 400 Operations Instructions Page 23

Comments to this Manuals