Metabo H 16-500 Use and Care Manual download pdf (Page 8)

ENGLISH

ENG

disappears (approx. 5 seconds). The entered

values are now saved in the program.

Note:

- To return from program operation to the normal

function, press the program button (8) until the

program symbol in the display (9) has disap-

peared.

- The factory settings of the programs are listed in

chapter11.

5.4 Stationary operation

If you wish to use the heat gun as a stationary

tool, ensure that it is placed on a safe, anti-

slip and clean base.

To use the heat gun in stationary operation, place

it on the anti-slip bases (5).

The air inlet (3) with grid

must be free of foreign

bodies.

Clean the air inlet (3)

if necessary.

Thermal protection

The thermal fuse switches the tool off completely

in the event of overloading.

Short-term voltage drops

Switching on the machine reduces the voltage

briefly. Unfavourable mains power conditions may

have a detrimental effect on other machines.

Network impedances less than 0.4 ohms should

not cause malfunctions.

Use only genuine Metabo accessories.

If you need any accessories, check with your

dealer.

For dealers to select the correct accessory, they

need to know the exact model designation of your

power tool.

For possible accessories, refer to the illustrations

on page 3.

A Flat spray nozzle

Drying, removal of old paint coats

BSpray nozzle

Removal of paint coats on window frames

C Reflector nozzle

Heating of plastics prior to forming; shrink

fitting of shrinking hoses

D Slotted nozzle

Lap welding of PVC fabrics and foils

E Reducing nozzle (only HE 20-600, HE 23-650

Control) for precise heating of specific points

(e.g. solders and welds)

F Welding shoe

G Plastic welding wire

for welding work

For a complete range of accessories, see

www.metabo.com or the main catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service

centre. For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Metabo's packaging can be 100% recycled.

Scrap power tools and accessories contain large

amounts of valuable resources and plastics that

can be recycled.

These instructions are printed on chlorine-free

bleached paper.

H 16-500

Rated mains voltage: 120 V

Rated mains frequency:50/60 Hz

Output: 1400 W

Air temperature: Stage 1:................... 750 °F

Stage 2:.................. 1100 °F

Air volume: Stage 0:..........................Off

Stage 1:...............8.5 cf/min

Stage 2:.............14.8 cf/min

Thermal protection: thermal fuse

Weight 28.9 oz (820 g)

HE 20-600

Rated mains voltage: 120 V

Rated mains frequency:50/60 Hz

Output: 1500 W

Air temperature: Stage 1:................... 120 °F

Stage 2:...........120-1100 °F

Stage 3:...........120-1100 °F

6 Servicing

7 Troubleshooting

8 Accessories

9 Repairs

10 Environmental Protection

11 Technical Specifications

17027019_0111 HE 23-650 HE 20-600 H 16-500 NAFTA.book Seite 8 Dienstag, 25. Januar 2011 4:36 16

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Metabo H 16-500 Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Metabo H 16-500