Metabo Invert 130/60 User Manual

MANU.115.M.ADV.00 1 ADV SERIES INVERT 120/40 ADV INVERT 130/40 ADV INVERT 130/60 ADV INVERT 140/35 ADV INVERT 140/50 ADV INVERT 160/50 ADV INVERT

10 1. Electrode welding Arc welding with coated electrodes is a fusion procedure that uses an electric arc as a source of heat. This is

11 NB: Descending welding needs a quick movement, while ascending welding needs a slow movement which heats the material to be welded.  Overhead:

12 INSTALLATION OF MACHINE IN TIG TIG DC WELDING (CARBON STEEL – STAINLESS STEEL – COPPER) Connect the mains power cable to a 230V single phase

13 1.TIG welding TIG welding is a fusion procedure that uses as a source of heat an electric arc created between an infusible tun

14 Welding method Pre-heat the starting point in the work piece, by moving the torch in small circles until the weld bead is formed. The electrode

15 2.TIG welding defects – troubleshooting DEFECT POSSIBLE CAUSES REMEDIES 1. The electrode melts when the arc strikes. A. Electrode connected to

16 WHAT IF THE INVERTER DOESN’T WORK? The welder doesn’t switch-on: check the mains connection and the switch position (1). Irregular electrode

17 AVAILABLE ACCESSORIES CODE: DESCRIPTION: 0000KIT16G Welding set with clamps and

18 TECHNICAL CHARACTERISTICS INVERT 120/40 INVERT 130/40 INVERT 130/60 INVERT 140-35 INVERT 140/50 INVERT 160/50 INVERT 140/50 G-PROT INVERT 16

19 BLOCK DIAGRAM INVERT 120-40; 130-40; 130-60; 140-35

2 TEC.LA S.r.l. thanks you for having chosen its welding machine, built with the principles of safety and reliability. The quality materials used in

20 INVERT 140/50 ADV

21 INVERT160/50 ADV

22 INVERT 140/50 ADV G-PROT

23 INVERT 160/50 ADV G-PROT

24 SPARE PARTS LIST INVERT 120/40 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.120.ELE.02.00 INVERT 120/40 ADV INVERT 120/40 ADV 2 Y.DD.COPE.

25 INVERT 130/40 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.130.ELE.04.00 INVERT 130/40 ADV INVERT 130/40 ADV 2 Y.DD.COPE.115.01.00 COPERC

MANU.115.M.ADV.00 26 INVERT 120/40 ADV INVERT 130/40 ADV

MANU.115.M.ADV.00 27 INVERT 130/60 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.130.ELE.05.00 INVERT 130/60 ADV INVERT 130/60 ADV 2 Y.DD.COPE.

28 INVERT 140/35 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.140.ELE.02.00 INVERT 140/35 ADV INVERT 140/35 ADV 2 Y.DD.COPE.115.01.00 COPERC

MANU.115.M.ADV.00 29 INVERT 130/60 ADV INVERT 140/35 ADV

3 Valued Customer, Hoping you will find our product to your satisfaction, we welcome you to our family, informing you that the ER

MANU.115.M.ADV.00 30 INVERT 140/50 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.140.ELE.03.00 INVERT 140/50 ADV INVERT 140/50 ADV 2 Y.DD.COPE.

31 INVERT 140/50 G-PROT Nr. TEC.LA Code Descrizione Description 1 DDF115.140.ELE.04.00 INVERT 140/50 ADV CON PROTEZIONE INVERT 140/50 ADV WITH PROTE

MANU.115.M.ADV.00 32 INVERT 140/50 ADV INVERT 140/50 ADV G-PROT

MANU.115.M.ADV.00 33 INVERT 160/50 ADV Nr. TEC.LA Code Descrizione Description 1 DDF115.160.ELE.02.00 INVERT 160/50 ADV INVERT 160/50 ADV 2 Y.DD.COPE.

34 INVERT 160/50 G-PROT Nr. TEC.LA Code Descrizione Description 1 DDF115.160.ELE.03.00 INVERT 160/50 ADV CON PROTEZIONE INVERT 160/50 ADV WITH PROTE

MANU.115.M.ADV.00 35 INVERT 160/50 ADV INVERT 160/50 ADV G-PROT

36 TEC.LA. S.r.l. Via Castel Morrone 15/C - 16161 Genova – ITALIA Phone +39 0107 450 222 – 0107 411 034 Fax +39 0107 406 917 e-mail: info@teclaital

4 GENERAL SAFETY INFORMATION Electric shock ELECTRIC SHOCK CAN KILL. Do not touch the parts under high voltage; Disconnect the power supply from

5 Noise The welding arc respects current legislation on noise levels (not exceeding 80db); Protective ear plugs or muffs must be worn to avoid damage

6 DESCRIPTION OF POWER SOURCE ADV series welding systems are designed for welding coated electrodes and for TIG welding with SCRATCH arc ignition; th

7 3. Front panel controls INVERT 120/40 ADV – 130/40 ADV - 130/60 ADV – 140/35 ADV -140/50 ADV – 160/50 ADV 1. “ON-OFF” SWITCH 2. “ON” LED

8 INSTALLATION AND USE Machine installation must be done by qualified personnel. All connections must be done in conformity with current specificati

9 INSTALLATION OF ELECTRODE MACHINE All welding parameter controls are placed on the welding machine front panel. Plug the power cord into a 230