Metabo BSA 14.4-18 LED BARE Use and Care Manual download pdf (Page 7)

ENGLISH en

4 Hole (8 mm diameter) for fastening the lamp to

a stand

5 Cut-out slot for wall suspension

6 Battery pack release button

7 Battery pack*

8 Clamping lever for angle adjustment

9 On/off switch

10 Transport position that protects the window

* depending on model

Insert a fully charged battery pack (7) (taking into

account the particular model).

Release the clamping lever, adjust to the required

angle and then secure the clamping lever.

Turn on and off at the switch (9).

Do not direct the light beam into the eyes of

people or animals.

The ideal storage temperature for battery packs is

between 10°C and 30°C.

Remove the battery pack from the device

before carrying out cleaning.

Do not clean with aggressive cleaning agents.

Ensure that the lamp and the battery contacts are

dry.

Repairs to Metabo machines must be carried

out by qualified electricians only!

If any of your Metabo power tools require repairs,

please contact your Metabo service centre. For

addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Do not allow battery packs to come into contact with

water!

To protect the environment, do not dispose of

power tools or battery packs in household

waste. Observe national regulations on

separated collection and recycling of disused

machines, packaging and accessories.

Before disposal, discharge the battery pack in the

tool. Prevent the contacts from short-circuiting (e. g.

by protecting them with adhesive tape).

To be used only with original Metabo battery packs:

14.4 V: 6.25467, 6.25456, 6.25458, 6.25454,

6.25498, 6.25526

18 V:

6.25455, 6.25457, 6.25459, 6.25468,

6.25469, 6.25499, 6.25527, 6.25584, 6.25587

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

U = Voltage of battery pack

I / II

=Power consumption

Phi

I / II

=Lamp flux

CRI = Colour rendering index

CCT = Correlated colour temperature

m = Weight (without battery pack)

D = D=Collar diameter

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Metabowerke GmbH

P.O. Box 1229, 72602 Nürtingen, Germany

www.metabo.com

Changes due to technological progress reserved.

3. Use

4. Cleaning

5. Repairs

6. Environmental Protection

7. Technical specifications

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Metabo BSA 14.4-18 LED BARE Use and Care Manual Page 7

Comments to this Manuals