| 83
MFX 65
MFE 30
WALL CHASERS
Diamond cutting discs
Diameter
x bore
mm
Segment
dimensions
mm
Maximum
speed
/min
Packing
unit
Order
no.
"Flexiamant Laser", segmented cutting edge,
for hard materials
Suitable for all hard materials such as concrete
(even reinforced), concrete pipes, kerbstones,
granite, hard sandstones, facing stones,
exposed aggregate concrete
Quality of diamond and bond adjusted to
highest requirements
Laser-welded diamond segments for optimum
safety
Maximum working speed 80 m/s
125 x 22,23 40 x 2 x 7,5 12.200 1 6.24541
230 x 22,23 40 x 2,8 x 7,5 6.600 1 6.24544
"Flexiamant Laser", segmented cutting edge,
for abrasive materials
For best cutting results in abrasive materials
such as fresh concrete, sand-lime brick,
sandstone
High-grade diamond quality in hard bond pro-
vides for high cutting output and optimum tool life
Laser-welded diamond segments for optimum safety
Maximum working speed 80 m/s
125 x 22,23 40 x 2 x 7,5 12.200 1 6.24641
1)
230 x 22,23 40 x 2,4 x 7,5 6.600 1 6.24644
Accessories
Order
no.
Suction hose
Connector Ø: 35/35 mm
Hose length: 4 m
Suction hose Ø: 35 mm
6.30344
1400 Watt
Electronic
Wall Chaser
MFE 30
2500 Watt
Wall Chaser
MFX 65
COMMON FEATURES
Suitable for quick and clean cutting of wall chases
Groove width adjustable
Spindle lock
Variably adjustable cutting depth
Robust Metabo Marathon motor
Power-saving work through drawing cut from top
to bottom
Adjustable additional handle
Supplied with chase extraction chisel
Also suitable for cutting by using only one diamond
cutting disc
Metabo winding protection grid
Auto-stop carbon brushes
Extraction nozzle for all common suction hoses
Special advantages
Tacho Constamatic (TC)
full-wave electronics
Starting current limitation
Electronic starting current
limitation
No-volt release switch
Roller under the motor
housing for exact machine
guiding
Rotatable handle without
tools
Metabo safety switch:
safety lock against
unintentional start
Overload protection
Metabo S-automatic torque
limiting clutch
Comparative
device characteristics
Torque 3,5 Nm 18 Nm
Diameter of cutting disc 125 mm 230 mm
Possible groove widths 10/17/23/30 mm 3/9/17/29/33/
37/41 mm
Cutting depth adjustable 0 - 30 mm 20 - 65 mm
No load speed 8.200 /min 6.600 /min
Rated input power 1.400 W 2.500 W
Output power 750 W 1.770 W
Rated load speed 8.200 /min 4.500 /min
Weight (without mains cable) 3,9 kg 7,7 kg
Standard equipment 4 spacer rings,
adjusting nut,
side handle, offset
screwdriver, span-
ner wrench, chase
extraction chisel,
sheet steel carry
case
7 spacer rings,
adjusting nut,
side handle, span-
ner wrench, chase
extraction chisel,
sheet steel carry
case
Typ MFE 30 MFX 65
Bestell-Nr.
1)
Standard equipment with MFE 30 (Order no. 6.01119.50)
Machine
– with 2 diamond cutting discs
– without diamond cutting discs
6.01119.50
6.0119
–
6.01225
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS
(98 pages)
(60 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals