Metabo STA18LTX Bare Use and Care Manual Page 11
- Page / 84
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ENGLISH
11
ENG
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
During work, the workpiece must lay flat and be
secured against moving, e.g. using clamps.
Do not try to saw extremely small workpieces.
When sawing, the footplate must make secure
contact with the workpiece.
When interrupting a cut for any reason, release the
trigger and hold the saw motionless in the material
until the saw blade comes to a complete stop.
Never attempt to remove the saw from the work-
piece while the saw blade is in motion or kickback
may occur.
Do not switch the machine on while the saw blade
is touching the workpiece. Let the saw blade reach
full speed before making a cut.
When restarting a saw in the workpiece, centre the
saw blade in the kerf and check that saw teeth are
not engaged into the material. If the saw blade
seizes, it may kickback from the workpiece when
the saw is restarted.
Keep hands well away from the sawing area and
the saw blade. Do not reach underneath the work-
piece.
Remove chips and similar material only with the
machine at standstill.
Remove the battery pack from the machine before
any adjustments, conversions or servicing are
performed.
Danger of injury due to the sharp jigsaw blade.
After stopping work, the jigsaw blade may still be
hot. Wear protective gloves.
Risk of crushing during operation! Keep your
fingers away from the area of the saw blade
tensioning device (2).
Remove the battery pack from the machine
when not in use.
LED (9): Do not view LEDs directly through optical
instruments, LED class 1M, classified as per
DIN EN 60825-1: 2003, wavelength: 400-780 nm;
t
imp
=
300
µs, 5 lm.
See page 3.
1 Clamping lever for securing the saw blade
2 Saw blade clamping fixture
3 Saw blade support roller
4 Saw blade
5 Anti-splintering footplate insert
6
Protective plate for attaching to the footplate
7 Footplate
8 Protective rod for preventing unintentional
contact with the saw blade
9 LED working light
10
Control lever
of
chip blower
11 Switch lock/transport lock to guard against
accidental activation
12 Trigger
13 Adjustment lever for pendulum motion
14 Hexagon spanner
15 B
attery pack release button
16 B
attery pack*
17 Capacity indicator button
18 Capacity and signal indicator
19 Screw for adjusting the footplate
20 Curved support plate indicating preset cutting
angle
* depending on features
• Metabo tool-free "Quick" saw blade tool change
system; sturdy clamping lever made of diecast
aluminium
• Integral LED working light for illuminating the
cutting line
7.1 Introduce the anti-splintering footplate
insert into the protective plate (5).
Danger of injury due to the sharp jigsaw
blade. Remove the saw blade
before fitting
(5) the anti-splintering footplate insert.
Turn the machine over so that the footplate faces
upwards. Insert the anti-splintering footplate from
the front,
ensuring the following:
•
The smooth side of the footplate faces upwards.
•
The slot is facing to the rear.
If you wish to work with the protective plate
attached (see chapter Accessories 11), fit the
anti-splintering footplate insert in the protective
plate.
5Overview
6 Special Product Features
7 Initial Operation
- STA 18 LTX 1
- Serial Number: 02298 2
- Originalbetriebsanleitung 5
- 5Überblick 6
- 6 Besondere 7
- Produkteigenschaften 7
- 7 Inbetriebnahme 7
- 8 Benutzung 7
- 9 Reinigung, Wartung 8
- 10 Tipps und Tricks 8
- 11 Zubehör 8
- 12 Reparatur 9
- 13 Umweltschutz 9
- 14 Technische Daten 9
- Original instructions 10
- 5Overview 11
- 6 Special Product Features 11
- 7 Initial Operation 11
- 9 Cleaning, Maintenance 12
- 13 Environmental Protection 13
- 10 Tips and Tricks 13
- 11 Accessories 13
- 12 Repairs 13
- 14 Technical Specifications 14
- Notice originale 15
- 5Vue d'ensemble 16
- 6 Particularités du produit 16
- 7 Mise en service 17
- 8 Utilisation 17
- 9 Nettoyage, maintenance 18
- 10 Conseils et astuces 18
- 11 Accessoires 18
- 12 Réparations 19
- 13 Protection de 19
- 14 Caractéristiques 19
- NEDERLANDS 20
- 5Overzicht 21
- 6 Bijzondere 21
- 7 Inbedrijfstelling 22
- 8 Gebruik 22
- 9 Reiniging, onderhoud 23
- 10 Handige tips 23
- 12 Reparatie 24
- 13 Milieubescherming 24
- 14 Technische gegevens 24
- Istruzioni originali 25
- 5 Panoramica generale 26
- 6 Caratteristiche specifiche 27
- 7 Messa in funzione 27
- 8 Utilizzo 27
- 9 Pulizia, manutenzione 28
- 10 Suggerimenti pratici 28
- 11 Accessori 28
- 12 Riparazione 29
- 13 Tutela dell'ambiente 29
- 14 Dati tecnici 29
- Manual original 30
- 5 Descripción general 31
- 6 Características especiales 32
- 7 Puesta en marcha 32
- 8 Manejo 32
- 9 Limpieza, mantenimiento 33
- 10 Consejos y trucos 33
- 11 Accesorios 33
- 12 Reparación 34
- 13 Protección ecológica 34
- 14 Especificaciones técnicas 34
- 5Vista geral 36
- 6 Características especiais 37
- 7 Colocação em operação 37
- 8 Utilização 37
- 9 Limpeza, manutenção 38
- 10 Conselhos úteis 38
- 11 Acessórios 38
- 12 Reparações 39
- 13 Protecção do meio 39
- 14 Dados técnicos 39
- Originalbruksanvisning 40
- 5Översikt 41
- 6 Särskilda 41
- 7 Före första användning 41
- 8Användning 42
- 9 Rengöring, underhåll 42
- 10 Tips och råd 42
- 11 Tillbehör 43
- 12 Reparationer 43
- 13 Återvinning 43
- 14 Tekniska data 43
- Alkuperäinen käyttöopas 45
- 5 Yleiskuva 46
- 6 Tuotteen 46
- 7 Käyttöönotto 46
- 8 Käyttö 47
- 9 Puhdistus, huolto 47
- 10 Neuvot ja ohjeet 48
- 11 Lisätarvikkeet 48
- 12 Korjaus 48
- 13 Ympäristönsuojelu 48
- 14 Tekniset tiedot 49
- Original bruksanvisning 50
- 5Oversikt 51
- 6Spesielle 51
- 7 Før bruk 51
- 9 Rengjøring, vedlikehold 52
- 10 Tips og triks 52
- 11 Tilbehør 53
- 12 Reparasjon 53
- 13 Miljøvern 53
- 14 Tekniske data 53
- Original brugsanvisning 55
- 5Oversigt 56
- 6 Særlige 56
- 7Ibrugtagning 56
- 8Anvendelse 57
- 9 Rengøring, vedligeholdelse 57
- 10 Tips og tricks 58
- 12 Reparation 58
- 13 Miljøbeskyttelse 58
- Oryginalna instrukcja obsługi 60
- 5Przegląd 61
- 6 Szczególne cechy produktu 62
- 7Uruchomienie 62
- 8Użytkowanie 62
- 9 Czyszczenie, konserwacja 63
- 10 Wskazówki i zalecenia 63
- 11 Akcesoria 63
- 12 Naprawa 64
- 13 Ochrona środowiska 64
- 14 Dane techniczne 64
- ΕΛΛΗΝΙΚA 65
- 5 Επισκπηση 66
- 6 Ιδιαίτερες ιδιτητες του 67
- 7 Θέση σε λειτουργία 67
- 9 Καθαρισμς, συντήρηση 68
- 10 Συμβουλές και τεχνάσματα 68
- 11 Εξαρτήματα 69
- 12 Επισκευή 69
- 13 Προστασία περιβάλλοντος 69
- 14 Τεχνικά στοιχεία 69
- Eredeti használati utasítás 71
- 5Áttekintés 72
- 6Különleges 72
- 7 Üzembe helyezés 8 Használat 73
- 9 Tisztítás, karbantartás 74
- 10 Néhány jótanács és 74
- 11 Tartozékok 74
- 12 Javítás 74
- 13 Környezetvédelem 75
- 14 Műszaki adatok 75
- 6Особенности 78
- 7 Ввод в эксплуатацию 78
- 8 Эксплуатация 78
- 9 Очистка, техническое 79
- 10 Советы и рекомендации 79
- Metabowerke GmbH 84
- 72622 Nuertingen, Germany 84
Related products and manuals for Power tools Metabo STA18LTX Bare
(36 pages)
© 2020, manymanuals.com. All rights reserved. | 0.926 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals