Metabo SBE 561 Use and Care Manual download pdf (Page 8)

ENGLISH

ENG

Select direction of rotation:

R=Clockwise

L = Anticlockwise

Screw the chuck firmly to the spindle and

tighten the safety screw inside the chuck

using a screwdriver. (Caution: left-handed

thread!)

Otherwise it may come loose during anticlock-

wise operation (e.g. when screwdriving).

6.6 Tool Change With

Futuro Plus Keyless Chuck (3)

Machines with the designation SB...:

See illustrations on page 3.

Insert the tool. Hold the retaining ring (a) firmly and

turn the collet (b) towards "GRIP, ZU" with the

other hand until the mechanical resistance which

can be felt is overcome.

Caution! The tool is not yet clamped!

Keep

turning the sleeve (

it must "click" when turning

)

until it cannot be turned any further -

only now

the tool

securely

clamped.

With a soft tool shank, retightening may be

required after a short drilling period.

Open the chuck:

Hold the retaining ring (a) firmly and turn the collet

(b) towards "AUF, RELEASE" with the other hand.

Note:

The grating sound which may be heard after

opening the drill chuck is functional and is stopped

by turning the sleeve in the opposite direction.

If the chuck is very securely tightened:

Unplug.

Hold the drill chuck using an open-end spanner at

the flats on its head, and turn the sleeve (b) vigour-

ously in the direction of "AUF, RELEASE".

Machines with the designation B...:

See illustrations on page 3.

Insert the tool. Hold the retaining ring (a) firmly and

turn the collet (b) towards "GRIP, ZU" with the

other hand until it will not turn any further.

With a soft tool shank, retightening may be

required after a short drilling period.

Open the chuck:

Hold the retaining ring (a) firmly and turn the collet

(b) towards "AUF, RELEASE" with the other hand.

If the chuck is very securely tightened:

Unplug.

Hold the drill chuck using an open-end spanner at

the flats on its head, and turn the sleeve (b) vigour-

ously in the direction of "AUF, RELEASE".

6.7 Tool Change With

Geared Chuck (2)

See illustrations on page 3.

Clamping tools:

Insert the tool and clamp evenly in all 3 holes using

the chuck key (1).

Removing tools:

Open the geared chuck (2) using the chuck key (1)

and remove the tool.

6.8 Removing the Chuck

Futuro Plus keyless chuck

Unscrew the safety screw - if available. Caution:

left-handed thread!

Hold the drill spindle securely using an open-end

wrench. Clamp an Allen key in the chuck and strike

lightly with a rubber hammer to loosen, then

unscrew.

Geared chuck

Unscrew the safety screw - if available. Caution:

left-handed thread!

Hold the drill spindle securely using an open-end

wrench. Insert the key in the chuck and strike

17026862_1007 NAFTA SBE BE 561 521 ff.book Seite 8 Donnerstag, 25. Oktober 2007 2:11 14

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Metabo SBE 561 Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Metabo SBE 561