Metabo PK 250 User Manual download pdf (Page 7)

Bolt front and rear crosshead plates (321x322)

to saw housing. Angle brackets with setting

screws "B" must point towards centre of

machine. Use 4 each hex. bolt M8x20, spring

washer B8.4 and hex. nut M8.

Place roller carriage extrusion (358) with both

brackets (319/320) onto crosshead plates. Scra-

pe off paint from slots of brackets if fit is very

tight. Secure bracket (319) to crosshead plate

with 1 each hex. bolt M6x16 and hex. nut M6.

Remove backstop plate (360) and place traver-

sing saddle (310) onto roller carriage extrusion

(358). Replace backstop plate.

User Responsibility

This genuine metabo accessory will perform in conformity with the description provided in this manual. It should

be checked periodically. Defective equipment should not be used. Parts that are broken, missing, plainly worn,

distorted or contaminated, should be replaced immediately. Should such repair become necessary, it is

recommend that such repairs are carried out by qualified persons approved by metabo or their representatives. The

user of this accessory shall have the sole responsibility for any malfunction which results from improper use or

unauthorized modification from standard specifications, faulty maintenance, damage or improper repair by anyone

other than qualified persons approved by metabo or their authorized representatives.

We reserve the right to change specifications without prior notificationand without obligation to backfit or supply

backfit parts or components.

2 Safety Instructions

- For model PKS 1500 the max. allowable workpiece weight resting on the table is 25 kg/55 lbs. More weight on

the sliding carriage can tilt the saw.

- For model PKS 2300 the max. allowable weight resting on the table is 35 kg/78 lbs. The support leg must be fitted

as described in 4 to prevent the saw from tilting.

3 Assembly Instructions

Contents

1 Specifications

2 Safety Instructions

3 Assembly Instructions

4 Support (only for PKS 2300)

5 Maintenance and Servicing

6 Scale Setting

7 Setting of Riving Knife

8 Hints for Operation

9 Spare Parts List

10 Exploded View Drawing

Sliding Carriage PKS 1500 Sliding Carriage PKS 2300

Table Size 280 x 505 mm 280 x 505 mm

Max. capacity at 90° 610 mm 1260 mm

Max. capacity at 45° 1010 mm 1660 mm

Overall length 1500 mm 2300 mm

Max. Allowable weight on table 25 kg 35 kg

Stock-No. 091 000 3291 091 000 3321

1 Specifications

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments

Metabo PK 250 User Manual Page 7

Comments to this Manuals

Related products and manuals for Power saws Metabo PK 250