Metabo KHE-D 28 Operations Instructions Page 4
- Page / 18
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ENGLISHen
4
Operating Instructions
With the appropriate accessories this rotary
hammer drill is suitable for impact drilling with
impact masonry bits and chiselling into concrete,
stone and other such materials, as well as for non-
impact drilling into metal, wood, etc. and for driving
screws.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
WARNING – Reading the operating instructions
will reduce the risk of injury.
For your own protection and for the protec-
tion of your power tool pay attention to all
parts of the text that are marked with this
symbol!
General Power Tool Safety Warnings
WARNING
Read all safety warnings and
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference!
The term "power tool" in the warn-
ings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) Work area safety
a)
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
2) Electrical safety
a)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e)
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f)
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
b)
Use personal protective equipment. Always wear
eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c)
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d)
Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e)
Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g)
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of dust
collection can reduce dust-related hazards.
4) Power tool use and care
a)
Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for which
it was designed.
b)
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c)
Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
Such preventive safety mea
ures reduce the risk of starting the power tool
accidentally.
1. Proper Use
2. General Safety Rules
- BHE-D 24 1
- KHE-D 24 1
- KHE-D 28 1
- Postfach 1229 3
- Metabo-Allee 1 3
- D-72622 Nürtingen 3
- Operating Instructions 4
- ENGLISH en 5
- 3. Specific Safety Rules 5
- 4. Functional Description 5
- 5. Assembly, Initial Use 5
- 6. Operation 5
- ENGLISHen 6
- Mode d’emploi 8
- FRANÇAIS fr 9
- 3. Consignes de sécurité 9
- 4. Vue d'ensemble 9
- FRANÇAISfr 10
- 5. Mise en service 10
- 6. Utilisation 10
- Instrucciones de manejo 13
- ESPAÑOLes 14
- 4. Vista de conjunto 14
- ESPAÑOL es 15
- 5. Puesta en marcha 15
- 6. Manejo 15
- 7. Consejos y trucos 16
- 8. Mantenimiento 16
- Metabowerke GmbH 18
- 72622 Nürtingen, Germany 18
- 170 24 9670 - 0912 18
Related products and manuals for Power drills Metabo KHE-D 28
(23 pages)
(40 pages)© 2020, manymanuals.com. All rights reserved. | 0.598 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals