Metabo STA18LTX 140 Bare Use and Care Manual download pdf (Page 12)

ENGLISHen

For sawing circles (dia. 100 - 360 mm) and making

cuts parallel with edges (max. 210 mm).

Attach the circular-cutting guide (

Fig. F-I)

- Slide the rod on the circular-cutting and parallel

guide sideways into the footplate (centre point (c)

faces downwards).

- Set the desired radius (d).

- Tighten the screws (b).

Attach parallel guide (

Fig. F-II)

- Slide the rod on the circular-cutting and parallel

guide sideways into the footplate (centre point (c)

faces upwards).

- Set the dimension (e)

- Tighten the screws (b).

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Battery packs must not be disposed of with regular

waste. Please return faulty or used battery packs to

your Metabo dealer.

Do not throw battery packs into water.

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-

circuiting (e. g. by protecting them with adhesive

tape).

Fig. G.

Changes due to technological progress

reserved.

U =Voltage of battery pack

=Maximum material thickness in wood

=Maximum material thickness in non-

ferrous metals

=Maximum material thickness in sheet

steel

=Stroke rate at idle speed

m =Weight (with smallest battery pack)

Measured values determined in conformity with EN

60745.

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

tool or power tool. In estimating the values, you

should also include work breaks and periods of low

use. Based on the estimated emission values,

specify protective measures for the user - for

example, any organisational steps that must be put

in place.

Vibration total value (vector sum of three directions)

determined in accordance with EN 60745:

h,CM

=Vibration emission value (sawing sheet

metal)

h,CW

=Vibration emission value (sawing wood)

h,...

=Uncertainty (vibration)

Typical A-effective perceived sound levels:

=Sound pressure level

=Acoustic power level

, K

= Uncertainty

During operation the noise level can exceed

80 dB(A).

Wear ear protectors!

12. Repairs

13. Environmental Protection

14. Technical Specifications

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comments to this Manuals

No comments

Metabo STA18LTX 140 Bare Use and Care Manual Page 12

Comments to this Manuals

Related products and manuals for Cordless combi drills Metabo STA18LTX 140 Bare