Metabo SSW18 LT 5.2 Use and Care Manual download pdf (Page 11)

ENGLISH en

With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer

impact duration (b) is required.

Recommendation: determine the correct impact

duration by carrying out trial screwdriving.

Caution! With small screws, maximum torque can

be reached even below an impact duration of 0.5

seconds.

- This is why the duration of the screwdriving

process must be monitored exactly.

- Select a suitable maximum tightening torque on

button (7) (see chapter 6.4).

- Adjust the tightening torque by pressing firmly or

lightly on the trigger (5), ensuring that the screw is

not damaged or that the screw head does not tear

off.

Use only genuine Metabo accessories.

Use only accessories that fulfil the requirements

and specifications listed in these operating instruc-

tions.

See page 4.

AChargers

B Battery packs with different capacity

Only use battery packs with the appropriate

voltage for your power tool.

CScrewdriving bits

D1/2“ tool

For a complete range of accessories, see

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service centre.

For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Observe national regulations on environmentally

compatible disposal and on the recycling of disused

machines, packaging and accessories.

Battery packs must not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact with

water!

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately and

handed in for environmentally compatible recycling.

Before disposal, discharge the battery pack in the

power tool. Prevent the contacts from short-

circuiting (e. g. by protecting them with adhesive

tape).

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.

U =Voltage of battery pack

=No-load speed

s=Impact frequency

H =Machine tool attachment

m =Weight (with smallest battery pack)

MAX

=max. tightening torque (setting I)

MED

=medium tightening torque (setting II)

MIN

=min. tightening torque (setting III)

Measured values determined in conformity with EN

60745.

Direct current

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

Emission values

Using these values, you can estimate the

emissions from this power tool and compare these

with the values emitted by other power tools. The

actual values may be higher or lower, depending on

the particular application and the condition of the

tool or power tool. In estimating the values, you

should also include work breaks and periods of low

use. Based on the estimated emission values,

specify protective measures for the user - for

example, any organisational steps that must be put

in place.

Vibration total value

(vector sum of three directions)

determined in accordance with EN 60745:

= Vibration emission value(screwdriving with

impact)

= Uncertainty (vibration)

Typical A-effective perceived sound levels:

=Sound pressure level

=Acoustic power level

, K

= Uncertainty (noise level)

Wear ear protectors!

8. Accessories

9. Repairs

10. Environmental Protection

11. Technical specifications

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Comments to this Manuals

No comments

Metabo SSW18 LT 5.2 Use and Care Manual Page 11

Comments to this Manuals

Related products and manuals for Cordless combi drills Metabo SSW18 LT 5.2