Metabo PK 300 Operations Instructions download pdf (Page 8)

7 Overview of Components/Terms

1 Riving knife

2 Saw blade guard

3 Rip fence

3a Auxiliary fence

4 Mitre fence

5 Push stick

6 Sliding Carriage

7 Table Rear Extension

8 Table Side extension

Optional accessories not shown:

- Edge Trimming Attachment

- Wheel Set

- Cam-lock Clamp

- Square & Round Stock Jig

7.1 Optional Accessories

Make a deflector board when crosscutting small work pieces (see paragraph 11.5

below). Do not use chipboard for making the deflector board.

Make a push block for cutting tenons (see

para. 11.7 below). The recess must corre-

spond to the thickness of the workpiece

that is to be worked.

Always use push stick when cutting strips

of less than 120 mm width (see para. 11.4

below).

Always use wedge cutting jig for cutting wedges or tapers (see para. 11.8 below). The

wedge cutting jig should be at least 300 mm long and 170 mm wide.

8 Jigs and Push Blocks

9 Safety Rules

As with all power tools there is a certain amount of hazard involved with the operator and his use of the machine. Using the

machine with the respect and caution demanded as far as safety precautions are concerned will considerably lessen the

possibility of personal injury. If, however, normal safety precautions are overlooked or completely ignored, personal injury to

the operator can develop.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

No comments

Metabo PK 300 Operations Instructions Page 8