Metabo KSA18 LTX Bare Use and Care Manual download pdf (Page 17)

ENGLISH

ENG

For dealers to select the correct accessory, they

need to know the exact model designation of your

power tool.

See page 4.

A Guide rail (guide plate 6.31019 is required)

B Guide plate.

For securing the circular saw on the guide rail

6.31213

C 2 clamp clips. To secure the guide rail.

D Circular saw blades. For wood and similar

materials. Medium cutting quality.

E Battery pack

FChargers

G Metabo universal vacuum cleaner

H Suction hose

I Adapter

Repairs to electrical tools must be carried out

by qualified electricians ONLY!

If you have Metabo electrical tools that require

repairs, please contact your Metabo service

centre. For addresses see www.metabo.com.

You can download spare parts lists from

www.metabo.com.

Metabo's packaging can be 100% recycled.

Scrap power tools and accessories contain large

amounts of valuable resources and plastics that can

be recycled.

These instructions are printed on chlorine-free

bleached paper.

Battery packs must not be disposed of with regular

waste. Return faulty or used battery packs to your

Metabo dealer!

Do not allow battery packs to come into contact

with water!

Only for EU countries: Never dispose of

power tools in your household waste! In

accordance with European Guideline 2002/

96/EC on used electronic and electric equipment

and its implementation in national legal systems,

used power tools must be collected separately

and handed in for environmentally compatible

recycling.

Explanatory notes on the specifications on page 2.

Changes due to technological progress reserved.

U = Voltage of battery pack

= No-load speed

90°

= Adjustable depth of cut (90°)

45°

= Adjustable depth of cut (45°)

A = Adjustable diagonal cut angle

Ø=Saw blade diameter

d=Saw blade drill diameter

a = Max. base body thickness of saw blade

b = Max. cutting width of saw blade

m = Weight

Vibration total value (vector sum of three

directions) determined in accordance with

EN 60745:

h, D

= Vibration emission value

(Sawing chip board)

h,D

= Uncertainty (vibration)

The vibration emission level given in this informa-

tion sheet has been measured in accordance with

a standardised test given in EN 60745 and may be

used to compare one tool with another. It is also

suitable for a provisional estimate of the vibratory

load.

The specified vibration level applies to the main

applications of the power tool. However if the tool

is used for different applications, with different

accessories or poorly maintained, the vibration

emission may differ. This can considerably

increase the vibratory load over the entire working

period.

An estimation of the level of exposure to vibration

should also take into account the times when the

tool is switched off or when it is running but not

actually doing the job. This may significantly

reduce the exposure level over the total working

period.

Identify additional safety measures to protect the

operator from the effects of vibration such as:

maintain the tool and the accessories, keep the

hands warm, organisation of work patterns.

Typical A-effective perceived sound levels:

= Sound pressure level

= Acoustic power level

, K

= Uncertainty (noise level)

During operation the noise level can exceed

80 dB(A).

Wear ear protectors!

Measured values determined in conformity with

EN 60745.

The technical specifications quoted are subject to

tolerances (in compliance with the relevant valid

standards).

11 Repairs

12 Environmental Protection

13 Technical Specifications

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 107 108

Comments to this Manuals

No comments

Metabo KSA18 LTX Bare Use and Care Manual Page 17

Comments to this Manuals