Metabo Mega 350 D Operations Instructions download pdf (Page 13)

ENGLISH

• Drain condensate from pressure

vessel

(29).

Caution!

The condensate contains oil

and must be disposed at a proper col-

lecting point.

• Check V-belt:

− Remove belt guard (30).

− Retension V-belt or replace, if

necessary.

− To adjust the V-belt tension,

loosen the four screws at the

motor base and shift the motor.

− Tighten the screws at the motor

base again.

− Replace the belt guard.

Every 250 operating hours

• Replace air intake filter element of

compressor pump.

• Replace air filter element of filter/

regulator unit.

Every 500 operating hours

• Drain oil from compressor pump

through the drain plug (28) and fill

with fresh oil.

Dispose of the waste oil envi-

ronmentally safe by taking it to a

proper collecting point!

Every 1000 operating hours

• Have unit serviced by an authorized

service station. This will extent the

compressor's service life considera-

bly.

5.2 Device storage

1. Switch unit OFF and unplug.

2. Release pressure from tank and all

connected air tools.

3. Store device in such way that it can-

not be started by unauthorized per-

sons.

Caution!

Do not store device unpro-

tected outdoors or in damp environ-

ment.

Do not lay device on its side for trans-

portation or storing.

For special applications the following

accessories are available at your spe-

cialist dealer – see back cover for illus-

trations:

Sealing

A Air Caulking Gun KP 910

for commercially available car-

tridges.

Stock-no. 090 101 0030

Sheet metal cutting

B Air Nibbler BN 540

extra small cutting radius; cuts steel

sheet up to 1.0 mm thickness.

Stock-no. 090 100 6784

Drilling

C Air Drill BM 310

especially handy tool for low-fatigue

working; right-hand rotation only.

Stock-no. 090 100 6725

• Air Drill BM 500

(not illustrated) with 3/8" keyless

chuck, fully reversible with quick

reverse feature.

Stock-no. 090 105 4533

Stapling / nailing

D Combination Air Stapler/Nailer

Kombi 40/50

for staples (type 90) from 20 mm to

mm and finishing nails (type

SKN) from 20

mm to 50.

Stock-no. 090 105 4720mm.

• Combination Air Stapler/Nailer

Kombi 40/50

for staples (type 90) from 15 mm to

32 mm and finishing nails (type

SKN) from 16 mm to 32.

Stock-no. 090 105 4711mm.

• Air Stapler KG 80/16

(not illustrated) for staples (type 80)

from 6 mm to 16 mm.

Stock-no. 090 105 4681

• Air Stapler KG 90/25

(not illustrated) for staples (type 90)

from 15 mm to 25 mm.

Stock-no. 090 105 4690

• Air Stapler KG 90/40

(not illustrated) for staples (type 90)

from 20 mm to 40 mm.

Stock-no. 090 105 4703

• Air Finish Nailer SKN 50

(not illustrated) for finishing nails

(type SKN) from 20 mm to 50 mm.

Stock-no. 090 105 4738

Spray painting

E Spray Gun FB 2200 HVLP

high-volume low-pressure feature

reduces paint mist bounce-back

and provides thicker coating at less

paint consumption.

Stock-no. 090 105 4460

• Paint Spray Gun FB 2200

(not illustrated) with 0.5 l flow cup;

professional spray gun; steplessly

adjustable round, horizontal and

vertical spray pattern.

Stock-no. 090 105 4452

• Paint Spray Gun SB 200

(not illustrated) with 1.0 l siphon cup.

Stock-no. 090 100 3882

• Paint Spray Gun FB 150

(not illustrated) with 0.5 l flow cup;

for spraying primers and paints of

varying viskosity.

Stock-no. 090 100 3874

• Paint Spray Gun FB 90

(not illustrated) with 0.75 l flow cup;

for spraying primers and paints of

varying viskosity.

Stock-no. 090 105 6064

Chiselling

F Air Hammer Set MHS 450

for construction and auto body work

Stock-no. 090 100 9210

• Air Hammer Set MHS 315

(not illustrated) to take off plaster

and tiles and for light chiselling

work.

Stock-no. 090 100 6911

Tyre inflating / checking

G Tyre Inflator Gauge RF 480

professional version (calibrated).

Stock-no. 090 105 4630

• Tyre Inflator Gauge RF 363

(not illustrated) same as RF 480, but

not calibrated.

Stock-no. 090 105 4622

6. Available Accessories

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 62 63

Comments to this Manuals

No comments

Metabo Mega 350 D Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Air compressors Metabo Mega 350 D